Things To Read

Tuesday, March 11, 2014

Hatch Complete

Hello, Frank here.

If you're still with us, thank you for reading. We have completed the incubation stage of baby chickens. As I mentioned earlier, about two weeks into the cycle I needed to decrease my temperature. That was a normal adjustment. My hatch rate came out to be about 50%. It was 50% of my birds and 50% of my friend's birds. 50% is not a good hatch rate, by any means, but that's about what I've been getting since I returned to Oklahoma six years ago. This means I had about 20 birds hatch.

A newborn

I did make one mistake. Since I only have 20 fingers and toes and it takes 21 days to hatch eggs, I miscounted when I took out the turner. I took it out four days before the hatch and it should have been three. You see, now you have a use for that sixth toe that you never thought would come in handy.

Another mistake. I normally use cardboard boxes and build a small brooder. But for a multitude of reasons, I was not able to come up with any.




Another mistake. When my birds started hatching, I looked at Fern and said, "We forgot to get baby chicken feed." This was Saturday morning. Fortunately, there is a feed store near by.


These strings come in handy if you can get hold of them.

Something I learned. A freshly hatched baby chicken is not very hungry, but it is thirsty. My hatchery bought chickens arrived Monday morning, as they were scheduled, and since they had been in the mail for a few days, they were very hungry and thirsty.
Unfortunately, I received two with stiff legs, and I just went ahead and flushed them. But, overall the chicks came, they're healthy, and now my big silver Rubbermaid tote, that is currently my brooder, is just about full.

 
So, tomorrow, I will start putting together a bigger brooder with cardboard boxes that I was able to find today. Some words to the wise. Avoid lifting your water and feed containers by the jar. It's a whole lot safer to grab the container by the bottom and lift up. I've never had a water bottle separate from the water dispenser, but more than once I have had the feeder separate and spill feed everywhere. You might have noticed that the water has a green tint to it. That's the electrolyte solution that I add to their warm water for the first couple of weeks.

Now, my job for the next couple of weeks is to keep the birds warm, hopefully, in a draft free environment, fed and watered. I will start looking right now, for birds with a crusted vent. This happens because of too high of a temperature and the birds dehydrate. It's easy to remedy 
by lowering the temperature and a bird with a crusted vent can be soaked in warm water. Only the vent portion, though. Most of the time you can clean them with a damp paper towel. But remember, do not pull the little crusty thing off, or you might injure and kill the bird.

I've included a link here as a safety feature about washing your hands and bird diseases that can affect humans. Take it for what it's worth.


And don't forget, everyone needs that first drink. Take them one at a time and dip their little beaks a couple of times. Give them time to drink and they are good to go.





In the next few days I'm going to build a permanent type brooder, install electricity in my chicken house and upgrade some interior fencing. Well, there goes TV for this week. And that reminds me, I don't own a television.


 

Here is another handy link that I borrowed from Murray McMurray hatchery on the care of baby chicks. It has some good advice.


So, my hatching is over for a while. Later in the summer, if I decide I need to can some more chicken meat, I might hatch another batch.


We'll talk more later. Frank



10 comments:

  1. We have been wondering how the hatch went, but with your baby goats arriving we knew you were really busy! For my brooder box I used a galvanized stock tank, the small round type for sheep. I made a sturdy divider of plywood and had my turkey poults on one side and chicks on the other. Here is a link that gives some idea of the sizes available.
    http://www.rangergate.com/stock_tank_round.htm
    The shallow ones that are 3 to 4 feet in diameter....They are multi use, water and brooder as needed and last well. The round is an advantage as no corners and they are easy to clean. Just something I thought you might find a bit interesting and info for your followers!

    ReplyDelete
    Replies
    1. You know Fiona, that's a great idea. Great minds work alike. As of yesterday, our baby chicks are in an oblong metal stock tank. I'll include a picture in the next chicken post.

      Frank

      Delete
  2. Gosh they're cute! I've made the same day counting mistake too. It's easy to do.

    ReplyDelete
    Replies
    1. One of our readers commented that she quits turning hers with one day left. I think next time I'll try two days. Then if I miss count it will actually be three days. Cool how that works, isn't it?

      Frank

      Delete
  3. Replies
    1. Just trying to help out, Kristine. Thanks for the comment.

      Frank

      Delete
  4. I learn so much from you !

    ReplyDelete
    Replies
    1. We learn every day, too. It's kind of fun to keep learning, hope I never quit.

      Fern

      Delete
  5. Congrats on the Hatch. It will be interesting to see what the chicks look like feathered out and adults. I am sorry you didn't get more to hatch. Hope it was not something we did/didn't do in gathering the eggs. I am quite sure its not the rooster not trying, he tries all the time.
    The goats are very cute.
    Have a good evening and I hope your Mortality rate is Twice your hatch rate.

    ReplyDelete
    Replies
    1. Thank you for reading and thank you for the comment. We had 50/50 hatch from each set. That's just the way the Big Guy wanted it.

      Frank

      Delete